Input:
* General information about the project (such as construction project, project manager, date, etc.).
*For eachmeasurement, you must enter the date, time, drop in water level, and pump capacity (in m³/h, l/s, or l/min). You can also enter additional sets of measurements and a comments column.
* The drop can be measured either in meters above sea level or in depth from ground level.
* Up to 7 additional groundwater monitoring stations can be added.
* Option to automatically import measurement data from an ASCII file (format can be selected freely).
Analysis:
* The program automatically calculates the yield curve based on the drop in water level and the pump capacity over a specified period of time.
* Determination of the permeability coefficient kf of a rock mass using 5 different calculation methods, with the assumption of a perfect or imperfect well:
- Fountains only
- Wells + n monitoring stations
- Well + 1 monitoring station
- Spatio-temporal analysis
- From the ascent.
Issue:
* Screen: Entire drawing (WYSIWYG).
* Printer/plotter: The pressure drop curve can be printed on a single sheet along with the pump capacity and, if desired, an additional measured value curve; the flow rate curve can optionally be printed on a second sheet. Table of kf value calculations. A report of the measured values can also be generated.
* Both the drawdown curve and the yield curve can be plotted to scale in a borehole profile diagram in WinBohr.
